Synthetic Diamond Wire Drawing Dies
（SSCD Wire Drawing Dies）

Single crystal diamond (SSCD) is a kind of synthetic diamond with high purity,no impurity and high stability.These quality characteristics also make the material have high hardness and stable wear resistance.
Synthetic single crystal diamond has very similar physical characteristics to natural diamond,so it can be used in all occasions where natural diamond mould can be used.
It is mainly used in fine and ultra-fine wire drawing,or in applications requiring excellent wire surface finish and good heat dissipation performance.

Typical Die Reduction Angles for Various Metals

Elongation	Area Reduction	Lead Zinc Silver Gold	Hard-Alalloys Nickel Copper	Brass Cualloys Stainless Steel	High Carbon Steel	Hot Drawing of Tungsten
5-9%	5-8%	14	10	9	8	10
9-14%	8-12%	16	12	11	10	10
14-19%	12-16%	18	14	13	12	12
19-33%	16-25%	22	18	16	15	14
33-54%	25-35%	24	22	18	18	16

Tolerance of Reduction Angle:+/-2°

Monocrystalline diamond (mono) is a kind of synthetic diamond under controlled conditions.It has the characteristics of high purity,no impurity and no crack.
Single crystal diamond wire drawing die is made of high quality die core,which has the advantages of uniform texture,strong wear resistance,high finish,high precision and long service life.It can ensure the surface finish and accuracy of wire rod and the production range of die inner diameter in the long drawing process0.05mm-1.5mm.

Products Range

mm	inches	ND	SSCD	PCD	TC
0.012-0.049	0.0005-0.0019	●	●
0.050-0.099	0.0019-0.0039	●	●
0.100-0.599	0.0039-0.0236	●	●	●	●
0.600-2.099	0.0236-0.0826	●		●	●
2.1-15.9	0.0827-0.6260			●	●
16.0-35.0	0.6260-1.3780				●

Tolerance

Diameter(inch)	Diameter(mm)	Tolerance(mm)	Roundness(mm)
≤0.00157	≤0.040	0.0003	0.0002
0.00158-0.00393	0.041-0.099	0.0005	0.0003
0.00394-0.01968	0.100-0.499	0.001	0.0005
0.01969-0.03936	0.500-0.999	0.0015	0.0008
0.03937-0.05905	1.000-1.499	0.002	0.001
0.05906-0.08661	1.500-2.199	0.003	0.0015
0.08662-0.12992	2.200-3.299	0.004	0.002
0.12993-0.18110	3.300-4.599	0.005	0.0025
0.18111-0.22834	4.600-5.799	0.006	0.003
0.22835-0.29921	5.800-7.599	0.007	0.0035
0.18111-0.41338	4.600-10.499	0.008	0.004

These quality characteristics also make the service life of the wire drawing dies more stable and predictable.
The advantage of this is that the diamond has a more consistent hole size than the natural diamond wire drawing dies.

The Selection of Natural Diamond Dies

New Die Range			Recut Range
mm	inches	stone#	mm	inches
0.050-0.099	0.0019-0.0039	1#	0.100-0.200	0.0039-0.0079
0.100-0.199	0.0039-0.0078	2#	0.201-0.300	0.0079-0.0118
0.200-0.299	0.0079-0.0118	3#	0.301-0.400	0.0119-0.0157
0.300-0.399	0.0118-0.0157	4#	0.401-0.500	0.0158-0.0197
0.400-0.499	0.0157-0.0196	5#	0.501-0.600	0.0197-0.0236
0.500-0.599	0.0197-0.0236	6#	0.601-0.700	0.0237-0.0276
0.600-0.799	0.0236-0.0315	8#	0.801-0.900	0.0315-0.0354
0.800-0.999	0.0315-0.0393	10#	0.901-1.099	0.0355-0.0433
1.000-1.199	0.0394-0.0472	12#	1.101-1.299	0.0433-0.0511

Most of the synthetic single crystal diamond drawing dies are LB type diamonds, which also contain nitrogen impurities,but exist in the form of dispersive substitution. Therefore,stable performance is the main feature of the dies.
Single crystal diamond has excellent heat dissipation performance,which can be used in high temperature processing technology.Its high hardness and wear resistance ensure a long service life of the die.